What impact of dilute the ink and emulsion due to the bright

What impact of dilute the ink and emulsion due to the bright colors of the extent?

About Zhongliqi offset sublimation ink, in exceptional circumstances dilute colors, because of the low color ink coloring power,
or the process of adding many auxiliary materials inappropriately and dilute ink, or a large amount of ink emulsification and other
factors, that are likely to reduce printing ink saturation, very bright colors imprinted impossible.

Because color ink diluted or added to suppress dry auxiliary materials and emulsification value increases, printed on paper and
dried slowly, permeability, penetration length of time will cause the ink blot is not thick, also imprinted color is not bright.

Product Description

Sublimation inks are designed to apply a mirror image onto paper for transfer to the final substrate. The prints are
transferred via heat and pressure onto most polyester or synthetic materials. When first printed onto paper, sublimation
inks appear to be weaker and duller than standard inks, however when transferred onto suitable substrates, the dyes
develop their true color strength and brilliance.

Advantages
(1)Good stability on the machine,clear dot reproduction,excellent ink-water balance.
(2)Be able to adapt to the demand for middle-speed or high-speed printing.
(3)During the normal condition, use the ink on the machine directly.

Products application

Use Scope

Offset (one color, two color and four color machines)

Suitable Fabrics

Polyester fabric, Triacetate fabric, Nylon fabric, Acrylic fabric, Polypropylene nitrile.

Typical Uses of Zhongliqi Sublimation Offset Ink

Surfboards , Skateboards , Snowboards , Skies , Custom Furniture , Interior Design , 3D dye sublimation applications,
sublimation aluminum sheet , key rings , display products , plates , mugs , ceramic etc.

Use method

Conditional attribute

(1)Be able to adapt to the demand for middle-speed or high-speed printing.
(2)During the normal condition, use the ink on the machine directly.

The printing process just needs 3 steps
(1)Print the image on paper, and normal paper is ok.
(2)Put the printed paper on substrate, such as polyester and nylon fabric.
(3)Put the paper and fabric on the heat-transfer machine. When the temperature reaches 180-220°C, the image will
be transfer printed from paper onto the substrate.

Application notice

Transfer Paper
Coated paper, offset paper,chrome paper and calendered paper.
Transfer paper should be 80-90 gr/m2 with dimensional stability.

Transfer temparature

About 185~220°C

Transfer time
About 10~30 seconds

Transfer pressure

0.5kg/cm2

Since sublimation ink belongs to gas shading, then the colour showing on paper and the colour showing on fabric are different.
So when we make PS-plate, the CMYK ratio is different from normal offset plate making.